Kleen Shampoo 100ml

Highly Concentrated 1:100 Formulation
One part Kleen Shampoo to one hundred parts water delivers a fully active, high-performance wash solution — making it one of the most economical vehicle shampoos available per wash. Just 5–10ml per vehicle wash cycle with no compromise on cleaning performance.
Removes Tough Dirt, Dust & Road Grime
Advanced surfactant chemistry lifts and encapsulates stubborn road dirt, dust accumulation, and atmospheric grime from all exterior surfaces — including textured plastic trim, rubber seals, wheel arches, and underbody panels.
Effective on Bird Droppings & Organic Contaminants
Formulated to break down and lift organic contaminants including bird droppings, insect residue, and tree sap — the acidic and proteinaceous deposits that cause paint damage if left untreated or scrubbed dry.
Paint Friendly — Clear Coat Safe
pH-balanced formulation cleans thoroughly without stripping wax protection layers, degrading clear coat, or dulling paint finish — preserving the vehicle's exterior appearance and paint protection over repeated washes.
Safe on Skin
Mild surfactant system is comfortable for extended hand-wash contact — no harsh chemical exposure, no skin drying or irritation — making it safe for professional car wash operators and DIY owners washing by hand.
Eco-Friendly Formula
Biodegradable formulation minimises environmental impact from wash water discharge — an important consideration for professional wash facilities, fleet operators, and environmentally conscious vehicle owners.
Exceptional Wash Economics
At a 1:100 concentrate ratio, Kleen Shampoo delivers a significantly lower cost-per-wash than ready-to-use vehicle shampoos — without volume, performance, or safety trade-offs. Ideal for high-frequency individual washing and high-volume commercial operations alike.

Always wash in shade or indoors. Washing in direct sunlight causes rapid evaporation of the wash solution — increasing the risk of water spots, streaking, and premature drying before rinsing.

1. Park the vehicle in a shaded area or indoors — away from direct sunlight and heat.
2. Rinse the entire vehicle thoroughly with clean water to remove loose surface dirt, dust, and debris before shampoo application. This pre-rinse step prevents loose abrasive particles from being dragged across the paint surface during washing.
3. Prepare the wash solution: dilute 5ml of Kleen Shampoo per wash bucket for motorcycles and small vehicles, or 10ml per wash bucket for cars, SUVs, and larger vehicles. Mix with clean water at a 1:100 ratio (product to water).
4. Apply the shampoo solution to the entire vehicle surface using a clean, soft wash sponge or microfibre wash mitt — working panel by panel from the roof downward to prevent dirty water from dripping onto already-cleaned surfaces.
5. For areas with heavy dirt accumulation, dried bird droppings, or stubborn grime — apply additional shampoo solution and scrub gently with a clean soft cloth or soft sponge. Avoid hard scrubbing on clear coat surfaces.
6. Rinse the entire vehicle thoroughly with clean water — ensuring all shampoo solution and dislodged contaminants are completely cleared from all surfaces, seals, and trim.
7. Immediately dry the vehicle with a clean, soft cotton cloth or microfibre drying towel to prevent water spots and mineral deposit marks from forming as water evaporates.
8. Pro Tip: For professional car wash operations and fleet washing, pre-mix Kleen Shampoo in a concentrated stock solution and dispense measured amounts per wash — this ensures consistent dilution ratios across every wash cycle and eliminates product waste from over-dosing.

Q: How do I dilute Soltek Kleen Shampoo correctly?
Kleen Shampoo is formulated at a 1:100 concentrate ratio — mix 1 part Kleen Shampoo with 100 parts water. In practical terms, this means 5ml per wash bucket for motorcycles and small vehicles, and 10ml per wash bucket for cars and SUVs. Do not use undiluted — the concentrate is designed to perform optimally at the recommended dilution ratio.

Q: Will Kleen Shampoo strip wax or paint sealant from my vehicle?
No. Kleen Shampoo is pH-balanced and formulated to be paint-friendly and clear coat safe — it cleans effectively without stripping applied wax layers, polymer sealants, or ceramic coating protection. Regular washing with Kleen Shampoo maintains paint cleanliness without degrading existing paint protection.

Q: Can Kleen Shampoo be used on motorcycles?
Yes. Kleen Shampoo is suitable for all vehicle types including motorcycles, scooters, cars, SUVs, and commercial vehicles. Use 5ml per wash bucket for motorcycles — the lower concentration is sufficient for two-wheeler surface areas.

Q: Is Kleen Shampoo safe for plastic trim and rubber seals?
Yes. The pH-balanced formulation is safe for all exterior vehicle surfaces including painted panels, plastic trim, rubber door seals, weatherstripping, and glass — it cleans without causing drying, cracking, or discolouration of rubber or plastic components.

Q: Why should I wash my vehicle in the shade?
Washing in direct sunlight causes the shampoo solution to evaporate rapidly before it can be rinsed off — leaving water spots, shampoo streaks, and mineral deposits on the paint surface. Working in shade keeps the wash solution active for longer, allowing thorough rinsing before evaporation occurs.

Q: How much does one bottle of Kleen Shampoo yield in terms of washes?
At the recommended dilution of 5–10ml per wash, a 500ml bottle of Kleen Shampoo yields approximately 50–100 individual vehicle washes — making it one of the most cost-effective vehicle shampoos available per wash cycle.