Brake Kleaner HD 100ml

Instant Contaminant Removal
High-pressure delivery system blasts through accumulated brake dust, road grime, grease, and oil residue on contact — cutting cleaning time significantly compared to manual degreasing methods.
High-Pressure Aerosol Delivery
The pressurised spray system directs cleaning solvent into recessed areas of caliper assemblies, drum interiors, and rotor hat sections that are inaccessible with cloths or brushes — ensuring complete system cleaning, not just surface cleaning.
Fast Evaporation — Zero Residue
The solvent carrier evaporates rapidly and completely — leaving no moisture, no oily film, and no residue that could contaminate brake pads or compromise friction coefficient at the pad-rotor interface.
Eliminates Brake Squeal & Chatter
Removes the grime and debris layers between brake components that cause vibration-induced squealing and chattering noise — restoring quiet, confident braking performance.
Broad Component Compatibility
Safe for use on disc rotors, drum brake components, brake pads, caliper bodies, brake lines, wheel cylinders, and ABS components. Compatible with most braking system materials used across cars, motorcycles, and commercial vehicles.
Improves Braking Efficiency
Clean braking surfaces maximise pad-to-rotor contact area and friction coefficient — directly improving stopping power, pedal response, and overall braking system performance.
Handy, Easy-to-Use Format
Precision extension tube allows targeted application in tight spaces. No disassembly required for routine cleaning. Practical for both workshop bay use and roadside maintenance.

Always work in a well-ventilated area. Brake dust may contain hazardous particulates — avoid inhaling dislodged dust during cleaning.

1. Shake the can well before use to ensure the solvent is fully mixed and the propellant is activated.
2. Before spraying, arrange adequate collection — place a drip tray, absorbent mat, or newspaper beneath the brake assembly to capture dislodged residue and solvent runoff.
3. Attach the precision extension tube to the nozzle for directed, controlled application.
4. Hold the can upright and position it 6–8 inches (15–20 cm) from the target surface — this distance ensures optimal spray pressure and prevents overspray wastage.
5. Spray Brake Kleaner HD directly onto the brake component — rotors, caliper body, drum interior, or pad surface — in short, controlled bursts, working systematically across the entire area.
6. For heavily compacted brake dust or caked-on grime deposits, follow the initial spray with light scrubbing using a non-abrasive brush, then apply a second flush of Brake Kleaner HD to clear loosened material.
7. Wipe down accessible surfaces with a soft, clean cloth to remove any remaining loosened residue.
8. Allow 3–5 minutes for the solvent to evaporate completely before reassembly or test driving.
9. Pro Tip: Make Brake Kleaner HD a standard step in every brake pad replacement procedure. Cleaning the rotor surface and caliper before fitting new pads eliminates contamination-related noise from the first drive — and is a quality marker customers notice immediately.

Q: Is Brake Kleaner HD safe for ABS components?
Yes. Soltek Brake Kleaner HD is compatible with ABS sensor housings and associated brake system components. Apply carefully around sensor wiring and connectors, and allow full evaporation before powering the system.

Q: Will Brake Kleaner HD damage brake pads?
Brake Kleaner HD is safe for use on brake pad surfaces. However, brake pads that have been heavily contaminated with oil or grease may have compromised friction material and should be inspected and replaced regardless of cleaning — no cleaner can restore friction material saturated with oil.

Q: Does Brake Kleaner HD leave any residue after evaporation?
No. Brake Kleaner HD is a fast-evaporating solvent formulation that leaves zero residue — no moisture, no oily film, and no chemical deposit — after complete evaporation.

Q: Can I use Brake Kleaner HD on motorcycle brakes?
Yes. Brake Kleaner HD is compatible with both disc and drum brake systems across motorcycles, scooters, cars, and light commercial vehicles.

Q: Why do brakes squeal after cleaning?
If squealing persists after cleaning with Brake Kleaner HD, the cause is likely glazed brake pads, worn rotors, or improper pad bedding — rather than contamination. Brake Kleaner HD eliminates contamination-related noise; mechanical wear issues require component inspection or replacement.

Q: How often should brake components be cleaned?
Professional workshops typically clean brake components at every brake pad replacement and at every 10,000–15,000 km service interval. For vehicles operated in dusty, muddy, or coastal environments, more frequent cleaning is advisable.