Clean Chain 100ml

Perfect Cleaning Action
Dissolves and lifts stubborn grease, oil, road grime, chain wax, and old lubricant deposits in a single application — leaving the chain surface clean and fully receptive to fresh lubrication.
Broad Vehicle Compatibility
Formulated to be safe across motorcycles, scooters, and bicycles — covering both O-ring and non-O-ring chains. One product for your entire workshop or fleet.
Quick Dry Formula
Evaporates rapidly after application, eliminating the wait time between cleaning and lubrication. No residual moisture. No contamination of the subsequent lubricant layer. Chain is ready for lube application within minutes.

Clean Chain is Step 1 of Soltek's two-step chain maintenance system. Follow with Soltek Chain Lubee for complete chain care.

1. Ensure the rear wheel can rotate freely — place the vehicle on a centre stand or paddock stand, or position it on a straight stand.
2. To rotate the chain: switch the ignition on, engage gear, and roll the throttle gently to bring the chain into motion — or rotate the wheel manually.
3. Attach the precision applicator tube to the Clean Chain nozzle.
4. Direct the applicator tube at the chain and spray evenly while the chain rotates, ensuring full coverage across every link.
5. For heavily soiled chains with compacted grime or hardened grease, scrub with a compatible chain cleaning brush immediately after spraying — before the solvent evaporates.
6. Allow 3–5 minutes for the solvent to fully evaporate and the chain to dry.
Inspect the chain — confirm it is clean and free of all residue before proceeding to lubrication.
7. Apply Soltek Chain Lubee for a complete, professional-grade chain service.
8.Pro Tip: On heavily neglected chains, apply a second round of Clean Chain after the initial scrub — the second pass removes loosened deposits that the first application lifted but didn't fully clear.

Q: Is Clean Chain safe for O-ring chains?
Yes. Soltek Clean Chain is formulated for high compatibility across chain types including O-ring chains. It cleans effectively without damaging ring seals or causing seal swelling.

Q: Do I need to rinse Clean Chain off after application?
No rinsing is required. Clean Chain is a quick-dry solvent — it evaporates completely after application, leaving no residue behind. Simply allow it to dry before applying lubricant.

Q: Can I use Clean Chain without a brush?
For regular maintenance, spraying and allowing the solvent to act is sufficient. For heavily soiled or neglected chains with compacted grease and grime, scrubbing with a compatible chain brush is recommended for complete cleaning.

Q: What should I apply after using Clean Chain?
Always follow Clean Chain with a quality chain lubricant. Soltek Chain Lubee — a MoLy-based, non-drip chain lubricant — is the recommended pairing for a complete two-step chain maintenance service.

Q: How often should I clean my motorcycle chain?
Chain cleaning is recommended every 200–300 km under normal riding conditions, or after every ride in rain or muddy terrain. Always clean before re-lubricating — applying lubricant over a dirty chain traps contaminants and accelerates wear.